Tools

Weld Mount B10:1 Gun Plunger for AT-6030 AdhesiveSingle Pack gun lunger for AT-6030 Adhesive Manufacturer : Weld Mount Manufacturer Part No : 8013

Weld Mount bBlack Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay u or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for...

Weld Mount bRetail Wire Tie KitCAN NOT SHIP AIR, UPS GROUND ONLYThe AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 c. AT-5 white wire tie mount. Just enough parts for a small wiring job and ideal introduction to Weld Mount. The...

Weld Mount b1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural art with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for...

Weld Mount AT-388 Dispensing GunThe AT-388 Adhesive dispensing gun comes with a 10:1 plunger.For Use With 50mL Cartridges of:AT-880Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge.  The AT-880 is a 10:1 mix ratio with...

Sea-Dog Emergency Deck Fill PlugNitrile-Buna RubberThis Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel...

Weld Mount b.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash anels for mounting to the console. Now they are used for securing a...

Weld Mount bAluminum Wire TieUsed with Stainless Steel or Nylon wire ties u to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to...

Weld Mount Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 PackWeld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating nutplates. All of the fasteners are mounted with our unique non-sag acrylic...

Weld Mount b2" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load aplications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304...

Panther Products Replacement Blade for Rope CutterIdeal for boat, camper and home use. Lightweight (1. 5 lbs. ), The handle fits in the palm of your hand with easy finger pull operation. It makes quick clean cuts in all types of synthetic ropes, lines...

Ancor 7-Piece Screwdriver Set with CaseFeatures:Insulated to 1000VIncludes convenient storage/carrying caseKit Includes:(1) 1/8" x 3" Slotted(1) 7/32" x 5" Slotted(1) 1/4" x 6" Slotted(1) Test probe(1) #0 x 3" Phillips(1) #1 x 3" Phillips(1) #2 x 4"...