Fortress G-125 65lb Guardian Anchor f/63'-72' Boats G-125
Fortress Marine Anchors
- Fortress Marine Anchors:
- Authorized Reseller
- Warranty:
- Full Manufacturer Warranty
- MPN:
- G-125
- SKU:
- CW55855
- UPC:
- 647124341253
Delivery:
Estimated delivery
if you place order before 3pm EST
Usually ships the same business day.
Returns:
30 day returns. | See Details
Frequently bought together:
Fortress Marine Anchors bG-125 65lb Guardian Anchor for 63'-72' Boats
Boat size recommendations are for boats of average windage and roportions in 30 knots of wind, average bottom conditions, and moderate protection from open seas. Remember that the loads in 42 knots of wind are twice as much as in 30 knots.
Use three-strand nylon rope, 6-12 ft (2-4 m) of chain and a minimum of 5:1 scope. Also, a minimum of 6 ft (2 m) of chain should be used for every 25 ft (8 m) of water depth. For storm conditions use an anchor one or two sizes larger.
Specifications:
*Note: Hard sand holding power figures above represent loads actually achieved on production Fortress and Guardian anchors under controlled horizontal pull conditions without dragging or resulting in disabling structural deformation.
Manufacturer : Fortress Marine Anchors
Manufacturer Part No : G-125
UPC : 647124341253
Boat size recommendations are for boats of average windage and roportions in 30 knots of wind, average bottom conditions, and moderate protection from open seas. Remember that the loads in 42 knots of wind are twice as much as in 30 knots.
Use three-strand nylon rope, 6-12 ft (2-4 m) of chain and a minimum of 5:1 scope. Also, a minimum of 6 ft (2 m) of chain should be used for every 25 ft (8 m) of water depth. For storm conditions use an anchor one or two sizes larger.
Specifications:
- Boat Length: 63-72ft/19-22m
- Weight: 65lbs/29kg
- Holding Power: 32° (Hard Sand): 18,000lbs/8,165kg
- Holding Power: 32° (Soft Mud): 3,600lbs/1,633kg
- Shank: 53"/135cm
- Fluke: 31"/79cm
- Stock: 43"/109cm
- Proof Coil Chain: 1/2"/13mm
- Nylon Rope: 1"/25mm
- Shackle Size: 5/8"/16mm
*Note: Hard sand holding power figures above represent loads actually achieved on production Fortress and Guardian anchors under controlled horizontal pull conditions without dragging or resulting in disabling structural deformation.
Manufacturer : Fortress Marine Anchors
Manufacturer Part No : G-125
UPC : 647124341253