Tools

AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a 10 to 1 adhesive that requires a mixing tip with more mixing chambers...

.75" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. ...

Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-PackThe HS200 stud is designed for heavy-load applications such as mounting filters and panels. The stud is inertial (friction) welded to a 2" base plate creating a very strong part. We...

Weld Mount bAluminum Wire TieUsed with Stainless Steel or Nylon wire ties u to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to...

Sea-Dog Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals...

Ancor 7" Combination Pliers - 1000VFeatures:Insulated to 1000VCombines both gripping jaws and wire cutterChrome VanadiumLength: 7" (17.8 cm) Manufacturer : Ancor Manufacturer Part No : 710020

Weld Mount b1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash anels for mounting to the console. Now they are used for securing a...

Weld Mount bSingle ClamEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 1.0" Stud...

Sea-Dog Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to...

Weld Mount bAcrylic AdhesiveCAN NOT SHIP AIR,UPS GROUND ONLYAT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develos working strength in 40 minutes. AT-6030 develops in...

Weld Mount bAluminum Base Wire Tie MountThis tie mount is rovided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is...

Sea-Dog Add-A-Snap - White - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. Manufacturer : Sea-Dog Manufacturer Part No :...